Description

The EV Charging Station NS features a stunning new design. It is available in blue, white, and black. The station has three-phase and single-phase capabilities, delivering a maximum of 22 kW AC in 3-phase or 7.3 kW in single-phase mode. Initial installation, setup, and monitoring are performed via VictronConnect through Bluetooth and/or the integrated web interface via a Wi-Fi access point or a Wi-Fi LAN.

The charger can be fully integrated and monitored remotely via a Victron Energy GX device and VRM. Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, but if you have PV, it can also be configured to use excess solar energy to charge your car.

High Power AC Charger – 22 kW The maximum power the EV charging station can deliver is 22 kW in 3-phase mode or 7.3 kW per phase. It can also be used in single-phase installations.

For optimal operation of the Victron EV Charging Station, a Victron GX device (such as the Cerbo GX) is highly recommended.

Wi-Fi: 802.11 b/g/n for configuration and monitoring For initial installation as well as monitoring, the internal Wi-Fi module can be configured in Access Point mode or Station mode.

Touchscreen 4.3-inch touchscreen for monitoring and control.

Light Ring Fully programmable Light Ring around the charging port to quickly determine the device status. It can be programmed via the web interface to display various light effects based on the current status (disconnected, charging, charged, etc.)

Automatic Mode To ensure maximum efficiency of the PV system, the EV charging station features an automatic mode that detects when excess power is available and uses only that power to charge the vehicle.

Manual Mode Configurable output current 6-32A

Real-time data display options – Color Control GX or other GX devices: see the Venus documents on our website. – On the device’s web page – On the VRM portal

About the Victron EV Charging Station

Specifications:
Electric charging station 22kW
Input voltage range (V AC): 170-265
Nominal charge current: 32A/phase
Nominal power: 22kW
Current output range: 6-32A
Wi-Fi standards: 802.11 b/g/n (2.4 GHz only)
Self-consumption: 15mA@230V
Configurable Max. Current: 10-32A
Means to disconnect: External circuit breaker (40A recommended)
Configurable price/kWh calculator (Eur): Default setting: 0.13 (adjustable)
Control type: touchscreen, web page, GX device via Modbus TCP
Light ring: 55 configurable light effects available
Protection: external RCD is required
Operating temperature: -25°C to +50°C
Storage temperature: -40°C to +80°C
Humidity: 95%, non-condensing
Data communication: Modbus TCP via WIFI
ENCLOSURE Color: Blue (RAL 5012)
Power connections: 6-10 mm² / AWG 10-8
Protection class: IP44
Ventilation: not required
Weight: 3 kg
Dimensions (h x w x d): 390 x 300 x 150 mm
STANDARDS Safety: IEC 61851-1, IEC 61851-22
Welded relay contact detection
Missing protective conductor detection
Missing ground detection
Short-circuited CP detection