Description

Victron Phoenix Inverter 12/1600 230V Smart –

This pure sine wave DC/AC inverter converts 12 VDC to 230 VAC for devices with a continuous power of 1300W (2400W peak power). The inverter features integrated Bluetooth and a VE.Direct communication port.

The Phoenix 1600VA inverter is therefore ideal for appliances requiring high start-up power, such as fridges and freezers. Widely used in campers, boats, and commercial vehicles. Suitable for Senseo, Nespresso, microwaves, kettles, and other household appliances.

Download the VictronConnect app

Download for Android from Play Store
Download for iOS from App Store
Download for Mac from App Store

About the Phoenix Inverter 12/1600 230V Smart

This new Victron Phoenix Inverter 12/1600 230V Smart model provides household appliances with 230V AC power from DC batteries. This pure sine wave DC/AC inverter converts 12 VDC to 230 VAC for devices with a continuous power of 1600VA at non-linear load (1300W with 2400W peak power). The inverter features integrated Bluetooth and a VE.Direct communication port. Bluetooth allows you to control the inverter via smartphone, tablet, or PC using the VictronConnect app for information and settings!

Integrated Bluetooth: fully configurable with a tablet or smartphone

• Low battery voltage alarm
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage: 210 – 245V • Frequency: 50Hz or 60Hz
• ECO mode on/off and ECO mode sense level
• Alarm relay

Monitoring
• Input and output voltage, load and alarms

VE.Direct communication port

The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable required) to configure and monitor the same parameters.

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Required to start loads such as power converters for LED lamps, halogen lamps, or power tools.
ECO mode

In ECO mode, the inverter switches to standby when the load drops below a preset value. Once in standby, the inverter will switch on for a short period every 2.5 seconds (adjustable). If the load exceeds a preset level, the inverter remains on.

Remote on/off

A remote on/off switch can be connected to a two-pole connector. Alternatively, the H-terminal (left) of the two-pole connector can be switched to battery positive, or the L-terminal (right) of the two-pole connector can be switched to battery negative (or, for example, the vehicle chassis).

LED diagnosis

Refer to the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For our low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax has a very short changeover time (less than 20 milliseconds), allowing computers and other electronic equipment to continue operating without interruption. Alternatively, use a MultiPlus with an integrated transfer switch.